Signal Generator by Duration

[aribago]

Hi, I'm trying to use this function to generate four different types of wave but, it only works for low frequencies and always shows only one second even when i change the duration of the wave. I don't understand what the problem is.

[Pnt]

This is not true.

What kind of wave you are trying to create, what frequency.......

I don't know what you want to do, but i suggest to use a graph, not a chart, and turn "autoscale x" ON

[aribago]

I'm trying to show only two cycles to represent a voltage. But the wave, for example a sine, shows the the number of cycles according to the frequency I introduce. I would like that the time in the x axis change according to the frequency, because when frequency=50Hz it is seen 50 cycles. I already use the waveform graph and the autoscale ON.

[Pnt]

For 50Hz, to display 2 cycles use duration=0.04

[Pnt]

Note that the x axis is the time in units:

1 Unit = duration in sec (/) nr of samples

So with duration=0,04 and nr of samples=100 , you have a time unit of 0,0004 sec.