08-21-2013 03:40 PM
Hi guys,
I want to send SCPI commands in LV in order to communicate with Agilent B2901 to do the Pulse Sweep Measurement.
I read the Agilent B2900 SCPI command manual already and located Figure 2-2 is what I want. But I am not sure all the commands I wrote is nessary?
Also, I am not sure how can I check my commands is right or not? NI spy may help but I am not sure how it gonna work.
Thanks
Solved! Go to Solution.
08-21-2013 05:10 PM
One way is to type the commands one at a time in the VISA Test Panel in Max.
08-21-2013 05:10 PM
For example, how can I know all the commands are need or been executed?
Thanks
08-21-2013 05:25 PM
08-21-2013 05:28 PM
Hi Huskerli,
It looks like there is already a LabVIEW driver for the Agilent B2901 available here:
NI Instrument Driver Network: Agilent B2900 Series
I haven't used it personally, but that might be worth taking a look at as it should take care of the syntax requirements etc.
I'd recommend downloading it from LabVIEW (Tools>>Instrumentation>>Find Instrument Drivers), this might be helpful:
KnowledgeBase 4GKAT3OH: How Can I Find and Install an Instrument Driver For My Instrument?
http://digital.ni.com/public.nsf/allkb/78FDB0C0DA2448E8862573B8005B64ED?OpenDocument
Regards,
08-21-2013 05:38 PM
Thank you all for reply
I just wondeing is anyone can answer me the NI spy question as well? I thought it may help me for SCPI commands check, But looks like I am wrong since no one talk about it.
08-21-2013 05:59 PM