From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
10-26-2017 05:07 AM
Hi,
I'm not-advanced user of LabVIEW and I'm having trouble trying to code something, which in principle is very simple.
I have captured a periodic waveform (from the "real world") in a ".csv" file. What I would like is to be able to
I was trying to use a read from spreadsheet block and then build a waveform or vector, to which an adjustable frequency reads the data points. Is this possible?
Thank you very much!!
Solved! Go to Solution.
10-26-2017 07:40 AM
Please attach your code (the actual VIs). This tells us a lot of things, including what you have tried, provides some idea of your LabVIEW knowledge, shows us where you might have misconceptions, tells us the Version of LabVIEW you are using, etc. And, not to be too cynical, demonstrates that this isn't a "Please do my homework for me" request.
Bob Schor
11-03-2017 05:11 AM
Hi Bob,
After working for quite a while I was able to sythesizer what I needed by copying the .csv contents to a string and reading it with a "from spreedsheet" function.
Thank you
11-03-2017 09:13 AM
Good for you. Since you didn't attach any code, I still don't know much about you or your LabVIEW environment (such as which Version of LabVIEW you are using -- the function names changed a few years ago). Your way works, but there is also a "one-step" function that would have been simpler and "more logical" to use.
Bob Schor