Fig.1 Fig.2 Hi, I am trying to run "CAN INput Stream to TDMS logfile" example from "NI Example Finder", but I encounter an issue as shown in Fig.1 above. I used different file path and cluster name as shown in Fig. 2. Could anyone help me to solve this issue? Thank you beforehand.

Hi Rudy, @rt089 wrote: Ok. In that case, can I use the tdms for logging the data and streaming it to my PC? May I know how to create tdms file in cRIO? Is there any example? You can use TDMS also in the cRIO. You create the TDMS file the same as on a standard (Windows) computer using the TDMS functions. All you need to care about is using the correct local path of your cRIO! (Open the web interface of the cRIO, which you hopefully installed with the system setup, and browse for a nice path…) For streaming data to your PC you should learn about using NetworkStreams!

Hi Rudy, @rt089 wrote: I am using cRIO 9045. May I know what do you mean by "filepath available to this system"? I just copied the example VI file into my folder where my Labview Folder located. In "TDMS open", I chose "create or replace" and file path is the same folder where I saved my VI. Still, I am not able to create the tdms file. My file path is D:\Document_Ddrive\CAN VI\Gaurav_Model\logfile_test.tdms The cRIO is a computer on its own - which has NO ACCESS to the files located on the harddrive of your development computer! (In general you don't want other computers give access to ALL files on your own computer nowadays - think about all those security implications!) You need to deploy all files needed by your realtime target onto this target. Did you read the cRIO basics tutorials?

Hi GerdW, I am using cRIO 9045. May I know what do you mean by "filepath available to this system"? I just copied the example VI file into my folder where my Labview Folder located. In "TDMS open", I chose "create or replace" and file path is the same folder where I saved my VI. Still, I am not able to create the tdms file. My file path is D:\Document_Ddrive\CAN VI\Gaurav_Model\logfile_test.tdms Thank you very much. Rudy

LabVIEW

Re: How do I write signals'names on the TDMS file using CAN bus without having to hardcode every single of them?

Solved!

Author

Thank you, GerdW.

Message 11 of 11

(208 Views)