From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
I`m trying to get the value of radio button reference in a subVI connected in form of cluster. When I try to run it I`m getting an object reference error. I`ve attached the snippet of my VI`s. Guide me in resolving it.
You may get the object reference error when you pass a Null reference. Check whether you have connected the reference and passing it properly. At the place where you are getting the error you can probe the reference and check it is not equal to 0. You can always use the function "Not a Number/Path/Refnum?" to check for valid reference.
-----
The best solution is the one you find it by yourself
I hope then i`m going wrong in creating the refnum of the radio button in the sub VI. I used control refnum right click select VI server class-> Generic-> GObject-> control->cluster->radio buttons is this correct way to create the reference control in a subVI.
Generally the best way to create a control refnum constant is directly from the control itself. Right-click the control and create a reference, then right-click the reference and create a constant from it.
Yeah i`ve created the same way as you described and made into cluster. In a SubVI we need to create a Control Refnum to pass the reference from the MainVI. I created that as I discussed in my
Generally the best way to create a control refnum constant is directly from the control itself. Right-click the control and create a reference, then right-click the reference and create a constant from it.
You should create the control the same way you created the constant, directly from a reference to the original control, or by taking a copy of the constant and changing it to a control.
