Time domain analysis of 2 order transfer function

[krishna_das]

Hello I am new in labview, I want to simulate this pid controller , using the values of kp = 12, Ki= 12.6316 and Kd = 7.6 ,  on the basis of mentioned gain values ti and td are calculated.

On running it I am getting such response

But this is not correct  as , implemented the same  thing in scilab and got response below.

Below is implementation in scilab

Please help..

[krishna_das]

Hi All

I  want to do time domain analysis of below system, I want to find settling time, rise time ,  etc. 

Please help

[GerdW]

Hi krishna,

---

@krishna_das wrote:

I  want to do time domain analysis of below system, I want to find settling time, rise time ,  etc. 

---

1. write down all the formulas you need to determine your data.
2. implement those formulas in LabVIEW!

Where are you stuck?

Do you really have a plant where you use PI gains of 2e-9 and 1e+20???

[krishna_das]

Yes I do have a plant , I want to  measure rise time , settling time, peak overshoot , peak time  etc for this

[krishna_das]

that  is T i =  1e+20 , means  Ki is set to zero.

[anasei]

Dear krishna_das,

https://www.intechopen.com/chapters/75407 I've found this article that is about labview data analysis functions. You can find what could help your case and use it. I guess you should do the analysis on the cluster that is depicted as a xy graph.