LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Not able to capture trigger in exe.

Hello 

 

I am using LabVIEW 2012 SP1.  The hardware is PXIe 6363 card . 

I have a VI which starts acquiring data on  Digital trigger( falling edge). The digital trigger lasts for around 100ms.

The trigger works perfect in when run the VI. But when I make the application exe, the trigger is missed and I get timeout error.

 

What is the difference between the VI and the exe?

 

In the VI , the trigger is captured everytime and data is acquired but this does not happen in exe. Please let me know.

 

 

0 Kudos
Message 1 of 3
(2,060 Views)
Does this happen when you run the exe on the same pc as you built it on or only on a pc without the LabVIEW development? On a new pc, you have to install the DAQmx runtime and the hardware configuration from MAX on the development pc. Both of these options are available when you create the installer.
0 Kudos
Message 2 of 3
(2,045 Views)

I ll check the DAQ run time and the installer settings. Thank you

0 Kudos
Message 3 of 3
(2,025 Views)