NI cDAQ-9184 with Labview 2010

[Sara_]

I have Labview 2010 and I'm trying to use the NI cDAQ-9184 with it, but the MAX doesn't recognize the device and the error -223805 appear. The chasis comes with the DAQmx-14.1 drivers, I install them and now the MAX recognize the device but in Labview the DAQ assistant is missing.

I try to uninstall the drivers and reinstall de old ones, but the MAX start to don't recognize de device again.

Anyone knows how I can get the cDAQ-9184 working under Labview 2010?

[cesan · Accepted solution]

Hi Sara,
Trying to help you with your issue, I would do the following
If you are not working with any other device, uninstall the Daq-mx 14 or the one you have installed in MAX and install the Daq-mx 9.9.

- The cDAQ-9184 works with the DAQ-mx 9.6 and later:

NI cDAQ Chassis NI-DAQmx Software Support (table 1-1)

https://www.ni.com/docs/en-US/bundle/cdaq-9181-9184-9188-9191-features/resource/372780k.pdf

- LabVIEW 2010 supports up to DAQ-mx 9.9 and earlier

NI-DAQmx and LabVIEW Compatibility

https://www.ni.com/en/support/documentation/compatibility/16/ni-daqmx-and-labview-compatibility.html

I hope it helps you solve your problem.

[Sara_]

Hi Cesan,

That works!!

I uninstalled the DAQmx 14 and reinstalled the 9.9 instead of my old DAQmx and my device now works fine.

Thank you very much!!