Modbus TCP Communication to Festo Drive

[EWiebe]

Perhaps this will help:

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019Lz2SAE

BTW: embed Screenshots with:

1. make screenshot of your screen

2. save under file on desktop

3. go on:

4. drag and drop created file into special picture control

[hanane00]

Hello Eugen

Thank you very much for the return.
I can communicate with the drive and send it orders.
Thanks again 🙂
Now I have more than modify the program to operate 4 driver simultaneously.

Hanane

[FixedWire]

fyi, there's a video:

Using LabVIEW to control Festo Drive using FHPP over Modbus TCP

[Ernest19]

Hello Ewiebe!

I have a festo driver CMMS-AS-C4-3A-G2, the communication of this driver is through RS-232, Can I use this VI if I change the communication from ethernet to RS-232?

[FixedWire]

Hi Ernest,

likely doable but you'll have some work ahead of you by looking at the init and a simple query:

[Ernest19]

Oh, I understand, what would be your recommendation in this case?

I thank you in advance