Metrohm Dosimat 665 driver for Labview

[Lehner Wolfgang]

Is there anyone who has or who knows where i could get drivers for a
Metrohm Dosimat 665 (Serial Device) with/for LabView ?

[shoneill]

You can download it from the following address. As far as I know, this driver is supplied with LabVIEW 6.1 (On the drivers CD).

http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/8ef357fbe53e4599862568ab005fbd47?OpenDocument

Most Metrohm Instruments are easily controlled by RS-232 (See the user manual for the Instrument).

The Programming is actually so easy, that drivers are really unneccessary.

Shane

[FM_UW]

I'm having trouble using this driver. I'm using the 8 pin (Dosimat end-round) cable to 25 pin (PC end) and the converting the 25 to 9 pin so I can use it with my PC. I'm able to communicate with the Dosimat using an old QB routine which makes this all the more frustrating. ... any thoughts?

[rolfk]

FM_UW wrote:

> I'm having trouble using this driver. I'm using the 8 pin (Dosimat
> end-round) cable to 25 pin (PC end) and the converting the 25 to 9 pin
> so I can use it with my PC. I'm able to communicate with the Dosimat
> using an old QB routine which makes this all the more frustrating.
> .. any thoughts?

QB has the habit of automatically adding a carriage return or line feed
to every sent string. Does your LabVIEW driver add a \r or \n (enable \
codes in the pop up menu) at the end?

Rolf Kalbermatter