Maximum sampling frequency

[vysikanth]

What is the maximum frequency which can be sampled in a LabView setup ?

I want to sample and reconstruct an analog signal of frequency around 6GHz. Is it possible ?

[GerdW]

Hi vysikanth,

the max samplerate is determined by the hardware you use!

Which hardware do you use?

I suggest to buy devices capable of those 6GHz measurements you want to take…

[mrtea]

I have been unable to find an NI made analogue input device capable of hitting that 6GHz that you are after (feel free to have a look ^^' just in case). I've included the links to some 3rd party products which seem to have NI compatibility might be of use and were the closest I could get. 

http://www.signatec.com/products/pdf/Signatec-Digitizer-PCIe-PX1500-2-Data-Sheet.pdf

https://spdevices.com/newsletter-1

http://www.dynamicc4.com/sp_digitizer.html

Hopefully this was somewhat helpful

As stated, the maximum frequency will depend on your hardware. Interfacing this with Labview should not be a problem as long as the hardware is able to cope.