11-22-2011 02:32 AM
Hi there,
I have the following installed onto my machine (Windows 7 32-bit, 4GB RAM)
1) LabVIEW 2010 SP1
2) MAX 5.0
3) NI-DAQmx 9.2.3
I have also a PCIe-6361 installed.
When I tried to open the Test Panel in MAX for the PCIe-6361, the Test Panel does not appear. Then, when I right-click the PCIe-6361 >> and click Properties, MAX threw an error saying that it has encountered an "unknown" error. MAX then shuts down by itself.
The error logs are attached here.
I have tried to repair MAX and DAQmx, but the result is still the same. Does anyone has any idea what could be the cause?
Thanks and Best regards,
Victor
11-22-2011 03:41 AM
VLg,
Have you tried one of these?
http://digital.ni.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9
https://decibel.ni.com/content/docs/DOC-12805
aCe
02-24-2012 11:11 AM
I have an issue similar to the one mentioned above.
I am also running a machine on Windows 7 - 32 bit with both Labview 2009 and 2011 installed on it.
I'm opening MAX and in Data Neighborhood i'm trying to Create New NI-DAQmx Task and Global Virtual Channels. When I click on one or the other to try and set up I get the error message shown in the attachment. I am using MAX version 5.0. Any advice of what I may be missing or doing wrong?