Labview help

[KarlG]

If anyone can help me out, I am trying to hook up a Keithley 3390 Arbitrary Waveform Generator to LabVIEW with GPIB to control the generator.  The waveform generator is hooked up with an oscilloscope with a BNC cable and I want to use the instrument drivers for Keithley 3390.  I am new with LabVIEW and I thought I did everything right but it keeps giving me this error message saying id query failed.  I have found on multiple sites to disable the id query all together.  Does anyone have any input?

[altenbach]

This is the LabVIEW help forum, so every single post is about "LabVIEW help". I would recommend to use a more descriptive title in the future.

Are you actually using LabVIEW? It might be better to ask in the instrument control forum. You can ask the moderator to move your post and/or edit the subject.

[crossrulz]

---

@altenbach wrote:

Are you actually using LabVIEW? It might be better to ask in the instrument control forum. You can ask the moderator to move your post and/or edit the subject.

---

He already asked there as well: http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/GPIB-with-labVIEW/m-p/3280686

[altenbach]

---

@crossrulz wrote:
He already asked there as well..

---

 Yes, 6 minutes later, probably in response to my post above. 😄

[crossrulz]

---

@altenbach wrote:

---

@crossrulz wrote:
He already asked there as well..

---

 Yes, 6 minutes later, probably in response to my post above. 😄

---

Well, I have been with my kid all day.  So I am playing a little catch up here.