LabVIEW modules for Varian Mult-Gauge Controllers?

[Christopher M. Balz]

While I've visited the OpenG.org website, I am a little surprised that
there are not more ready-made VI's available for various common
gauges. Does anyone have any general pointers on where to look?

Thanks,
- Chris

[JDesRosier]

Chris,

A good resource for instrument drivers is the NI website at this URL: http://www.ni.com/devzone/idnet/

If you cannot find an instrument driver for your device on this site, you should submit a request for the driver by clicking the [request driver] link. Also, if the device has a RS-232 port, you can use LabVIEW's VISA express VIs to communicate with the instrument.

You may also want to flash an email to the manufacturer to see if they can provide you with a LabVIEW instrument driver for the device.

I hope this helps. Have a great day!

Joe Des Rosier
National Instruments

[S_Kratz]

Hi Chris !
I am having the same problem you described ! Iam looking for a Varian multi Gauge driver - did you make any progress with that ? Thanks for your help
Stephan

[scott-e]

Hi Stephan...
any luck on Varian multigauge examples/drivers?
I'm looking for the same thing

Scott

[Maxxximus]

I am already doing a driver for multi gauge by rs232 port and i ave create a driver for the different card inside. if you what to know more about it call me.

[2B]

Hi Maxxximus, I am interested getting code for my Varian Multi-Gauge. Could you post your code? Hope to hear from you soon. Thanks, Howard

[tangwenxin]

Hi, Maxxximus,

Could you also forward the driver code to me, I also hope to read the varian gauge reading by labview rs232. I found it is not possible to
use VISA to talk with instrument.   If possible, many thanks indeed.

Wen-xin

[XMof]

Ciao Maxximus,

Do you happen to have the LabView code for the Varian Multi-pressure-gauge-controller
available?

We arre very interested in it.

Either LV 7 or LV 8.

Buongiorno

HP/hans.piest@gmx.de

[PCI 6534]

Hi Maxxximus,

I am also interested getting code for my Varian XGS-600  Multi-Gauge controller.

Could you post your code?
Hope to hear from you soon.

Thanks,

Yang

[Dennis_Knutson]

Kind of silly posting a question to someone who has not visitied the boards in years and has not responded to any of the earlier requests.