How to read value from Fuji F70S PLC using Ethernet

[Asif138]

Hi friends

i want to read value from fuji F70S PLC using Ethernet. as i did not find its driver in OPC server. i found option using modbus. but i never use modbus. can any one share any example the communication with labview and fuji f70s PLC.

Thanks,

asif 

[Asif138]

any help please...

[RavensFan]

Patience.

It is very possible that no one else has specifically used the PLC you are asking about.

And it is Saturday, pushing for help just 13 hours after your initial post, when most of those hours were night time for most of the people who visit the forums is just not needed.

[elcalverado]

Hi Asif,

I haven't found any examples specific to the PLC you're using, but there is a lot of general documentation on communicating with PLCs using different implementations of Modbus. Have you checked out these links?

Connect LabVIEW to Any PLC With Modbus

Introduction to Modbus using LabVIEW

Application Development with Modbus

Jordan 

Applications Engineering

NI