04-29-2016 04:30 PM - edited 04-29-2016 04:32 PM
Hi everyone, I just bought an HID OMNIKEY Smart Card Reader (OMNIKEY 5025 CL). I would like to read the Card Number from the Smard Card Reader. Is there a .dll to inteface to that allows me to do this with LabVIEW using the "Call Function Library Node?"
Thanks!
04-29-2016 04:41 PM
since it claims to support the PC/SC standard you will probably want tto access this Windows API: https://msdn.microsoft.com/EN-US/library/aa374731.aspx#smart_card_functions
04-29-2016 04:52 PM
Thanks for your response roflk. Looks like the winscard.dll would work for me. Does anyone know the steps (protocol) using the winscard.dll functions to use LabVIEW to read the Smart Card Number from the PROX Card reader?
09-22-2017 03:58 PM
Where you able to read the HID Card using the Omnikey 5025 CL?
I have problems trying to read the card, I cannot install the drivers. I says "Unknown Smart Card" instead of "OMNIKEY" in Device Manager
09-22-2017 04:05 PM
Gus,
I was able to. Try installing the Workbench. If you can't read it in the workbench then you can't read it at all.
Here's the install link:
09-22-2017 04:17 PM
Thank you, testdesign
Yes, I can read it in workbench. and now...how to read the card using labview?
09-22-2017 04:41 PM
Thank you for your response, I cannot detect the card as COM. Where you able to?
09-22-2017 05:03 PM
The card reader does not come up as COM.
It comes up at a Smart Card Reader in device manager.
09-22-2017 05:15 PM - edited 09-22-2017 05:16 PM
Take a look at this forum: I used the Tresman.vi example in message 37/44. This at least showed me how to read the ATR data like the Workbench does. I have modified it for my specific use but the VI will indeed read the ATR data without any modifications. There is a lot of other good stuff in this message thread for reading the ATR data.
https://forums.ni.com/t5/LabVIEW/pc-sc-Scardtransmit/td-p/815089/page/4
09-22-2017 05:20 PM
This is how it shows in Device Manager...what would be the next step to read it in labview?