How do i create this waveform?

[Paddy1985]

I can't make this signal on my own... Can somebody help me plz?

The signal thus consisted of:

1. Window 1: wave of 40 Hz and amplitude 3 extending from 50 to 375 ms

2. Window 2: wave of 170 Hz and amplitude 3 extending from 130 to 170 ms

3. Window 3: wave of 60 Hz and amplitude 3 extending from 400 to 425 ms

4. Window 4: wave of 20 Hz and amplitude 4.5 extending from 450 to 475 ms

5. Two Gabor atoms with amplitude of 3.5, width 10 ms and frequencies of 90 and 170 Hz that were centered at 225 ms and 250 ms respectively.

It should look something likt the picture in the attachtment

With Kind Regards,

Patrick

Message Edited by MrHond on 06-20-2006 12:11 PM

[Paddy1985]

nobody?

[RikPrins]

Hello,

In the Labview shipping examples there is an example on how to append waveforms in labview. Go to: Help>>Find examples. In the example finder select the search tab and enter: creating waveforms. There will be an example called: Append Waveforms example.vi.

Regards,

RikP

National Instruments