Graph problem

[ABCEDFG]

Hi

How to make vi of the following formula

D=(e+t)/[1-(h-1)v]

d=delay,t=time,h=hops,v=utilization where  e is fixedand all other values are changes

I want to make Graph between Delay'D' and hops'h'

You can also checked my vi  which i tried but due to this there is no changes in graph

kindly help me iwill be very kind to you all thanks

[Dennis_Knutson]

Instead of a regular graph, it sounds like you want to use the XY Graph to plot one array against another. You simply bundle the x and y arrays together and wire it the XY Graph.

[altenbach]

It seems you are linearly  ramping "h" from 1 to 10 with a constant increment. Just feed the D array to a waveform graph and set the x-axis offset to "1". That's it!

If the h values were not equally spaced, you would need an x-y graph. For equally spaced x, this is optional.

Both methods are shown in the attached (LabVIEW 7.0).

[ABCEDFG]

how to make both vi  using xy graph

[devchander]

Go to LabVIEW>> Find Examples>> Fundamentals>>Graphs and Charts>> XY Graph.vi

This example VI illustrates how to Build a X Y graph

[altenbach]

---

@ABCEDFG wrote:
how to make both vi  using xy graph

---

Have you even looked at my example above?

It shows the technique for both a waveform and an xy-graph. 🙂 Just deleted what you don't need.