You did a download instead of running what I told you run, didn't you? If you had, the driver would have been installed in the correct location. You didn't follow the directions for manually installing it. Since you did not follow my instructions either, I don't see the point in trying to help
it is not often that i correct DK
"Genuine Windows" Enough said?
i didnt mean to hurt anyone. i already downaloded NI.VISA - http://www.ni.com/download/ni-visa-5.3/3823/en/
I already download plug and play example - Tektronix TDS 3000 Series Oscilloscope Certified LabVIEW Plug and Play (project-style) Instrument Dr... and put it in my library.
anything else i need to download sir?
sorry again sir.
i hope you can guide me until i finsh my project sir
since TDS3012 can communicate with pc using ETHERNET cable. how am i going to change the red arrow in the picture i attached.
do i have to attached my pc to the oscilloscope first or i can configure it manually without connecting it to the scope yet?
You don't have to add it in MAX. I've done a few systems with a similar scope without doing that. But you will have to setup the scope to use the Ethernet port, set the IP Address, and I think also set the host to your computer's IP address (I'm not remembering the exact terminalogy at the top of my head). And you won't be able to use the drivers until you are actually connected to the scope.
Hello and Good day
I want to connect my pc (windows 😎 to the oscilloscope TDS3012C and read all the reading at the labview I already tried by using
1.NI MAX. and i cannot detect any connection from the scope (as attached)
2. By changing Ip address from the scope. when i first time operate this scope. it doesnt give any ip address. so i assigned any ip number as attached I followed step by step from this link - http://www.tek.com/support/faqs/how-do-i-connect-my-oscilloscope-ethernet-connection-ni-visa but in wins 8 there's is IPV4 and IPV6.
i already change the ip adresses at IPV4. and open web address http://'ip address'/ but nothing came out.
hope any solution from the experts