FPGA Image for USRP X410 fails to populate on NI-USRP Configuration Utility

[olivia_mammadova]

Hi,

i tried to configure the NI-USRP for the device USRP X410 using the guide https://www.ni.com/docs/de-DE/bundle/usrp-x410-getting-started/page/getting-started.html. Unfortunately, the filesystem cannot be updated after mender committing. You can see in the screenshot Mender_access.png. I use PCIE 8398 and 1Gbit Ethernet Cable.  Inspite of it, the fpga image on NI-USRP Configuration Utility cannot populate automatically. 

Do you have any solutions to fix these problems?

Thank you!

Best regards,

Olivia

[szczupak11]

Hi

Do I have the same problem, or have you already found a solution?

I will be very grateful for any help in this matter.

Best regards,

Mirek

[szczupak11]

Hi

 I have the same problem, have you already found a solution?

 I will be very grateful for any help in this matter.

Best regards

 Mirek

[ramisali96]

Hi,

If the FPGA image fails to populate, please do the following:

I was able to locate the FPGA image at C:\Program Files\NI\LVAddons\niusrprio\1\instr.lib\niUSRP\Reference FPGA\FPGA Bitfiles

Manually search your PC for the FPGA image and load it into the NI USRP Configuration Utility.

There are a total of 4 types of images in this folder, which can be used depending on the application.