Drivers missing

[himre]

I have installed the LabVIEW 2024 Q3 and the device drivers (latest available i.e. DVD-Jan-19-1) and several times did the repair process and re-installation. But still I cannot use IEC61850 driver, and opening even examples from NI it throws an error of: 
- This VI needs a driver or toolkit component that is not found. Missing resource file "IEC61850Client.rc".
Indeed I have less example with respect to the LabVIEW 2018. I wonder what is missing and if I have to follow certain installation sequence, what that could be.

[santo_13]

Latest device drivers are 2024 and you're installing 5 year old drivers.

Which VI or application uses IEC61850? it does not sound like a standard NI device driver

[himre]

Hello Santosh and thanks for the reply.

There are even NI examples of IEC61850 MMS telecommunication that you may find in Example Finder, and they are standard VI.
I first certainly installed NI-Industrial Communications for IEC 61850 Download - NI driver.

Where can I find 2024 Device Drivers? Looing in NI Device Drivers Download - NI I thought 2019 is the latest. This is what I see.

Cheers,

H 

[softball]

Hi

NI has a bad habit of tricking people.

What you see was the latest release of a bundle of software :

NI apparently decided to stop releasing drivers as a bundle. And did so in 2019.

Look for download of the individual drivers NI-DAQmx, NI-VISA, NI-SCOPE, and NI-SWITCH as needed.

Regards

[himre]

Hi,

Thank you very much for this interesting hint.

However, I did the update from NI Package Manager and I see these drivers are upgraded to 2024 Q4. Shouldn't that solve the issue?

Best regards,

H

[softball]

Hi again

Using NI Package Manager is the modern procedure promoted by NI.

I prefer the old fashioned way downloading the often huge complete driver(s) offline and then install :

The offline download option will probably vanish in the future. NI has introduced changes to the procedure lately for some products.

Regards

[himre]

Thanks for your indications!

So you suggest the problem is the way of installation of drivers and I better to manually download each driver and install them.

Since several times I uninstalled/re-installed LabVIEW and all drivers, and that takes time, isn't there any other thing that I could check before?!  
Also because I am seeing this error while using particular driver i.e. IEC61850, I am not sure the problem is which driver and which ones are necessary. I actually downloaded the only available driver of IEC61850 protocol and installed it (which required LabVIEW 32bit too).

Thanks again for your kind support.