Driver for UNIDEX 600 PCi

[Rodolphe Della Negra]

Does anyone have a driver for the U600 PCi PC based Motion
Controller(Aerotech)?



--
**********************************************************************
Nom : DELLA NEGRA
Prenom : RODOLPHE

E-MAIL : r.della-negra@ipnl.in2p3.fr

Adresse :

Institut de Physique Nucleaire de Lyon
43, bd du 11 Novembre 1918
69622 Villeurbanne cedex

Tel : 04 72 43 11 00
Fax : 04 72 43 14 52
>
> \\\|///
> \\ - - //
> ( @ @ )
> --------oOOo--(_)-oOOo------------------------------------

**********************************************************************

[kmoermond]

Sorry I can't provide code but I developed an inspection system a couple years
ago using the U600 when it first came out. Aerotech worked with us to enable
enough functions to be used via Call Library to make the board work for our
needs. At the time they did not have what complete ActiveX controls for
the U600 nor would LabView allow their use. My recommendation would be to
look at Aerotech's ActiveX controls as an easier method than use of Call
Library.



"Rodolphe Della Negra" wrote:
>>Does anyone have a driver for the U600 PCi PC based Motion>Controller(Aerotech)?>>>>-->**********************************************************************>Nom
: DELLA NEGRA>Prenom : RODOLPHE>>E-MAIL : r.della-negra@ipnl.in2p3.fr>>Adresse
:>>Institut
de Physique Nucleaire de Lyon>43, bd du 11 Novembre 1918>69622
Villeurbanne cedex>>Tel : 04 72 43 11 00>Fax : 04 72 43 14 52>>>>
\\\|///>> \\ - - //>>
( @ @ )>> --------oOOo--(_)-oOOo------------------------------------>>**********************************************************************>>