Howdy! I have a question regarding a nagging problem that we've been having lately with our LabVIEW RT Application and sbRIO-9651 SOM controllers. I'm trying to run the top-level RT VI for our application from the project explorer window. When I do that, LabVIEW begins to deploy all of the VI's within the application but at the very end of the deployment there is a message that states "Deployment completed with errors" as you can see in the attached screenshot. Then the board restarts and I lose connection. I have gone through the list of deployed VI's and do not see any VI's that are broken or have been deployed with an error. The only indication of an error in the deployment is at the end of the deployment I tried running a simple example program on the RIO called sbRIO-9651 Read On-Board Temperatures. The RT code for this example project has an enable/disable diagram structure surrounding the FPGA interface reference section of the code. I was able to duplicate the error when this section of code was enabled. However, when this section of code was disabled and only the RT code was run on the controller (no FPGA interface) the code was able to deploy and run successfully. The additional attached screenshots show this as well. We have 2 custom carrier cards that two separate SOM boards are docked on. This problem has occurred on both of these systems. We also have a third SOM with the NI Reference Carrier Card in-house. I've also swapped out the SOM from the reference carrier card with the SOM on our custom board and the error persists. I've also used 2 different development laptops to try and deploy the code and the error persists. The only way I'm able to run the top-level RT VI on the SOM and custom board is when the FPGA interface VI's are disabled. However, the VI's run with no problem on the NI Reference Carrier Card (FPGA Reference VI's enabled). We're running: Windows 10 LabVIEW 2017 SP1 NI CompactRIO 17.0 on the SOMs I'm communicating with the SOM's via the USB connection. Any help would be sincerely appreciated. Thank you, Alex

Hey Alex, If the VIs work on the Carrier Card and not on the custom board, then there's going to be something specific to the custom board that's causing issues. Regarding the interactive mode VIs, I apologize for not quite understanding your point. If an FPGA VI runs, that says to me that it's working properly. Are you saying that if you only run the FPGA VI directly for the custom board, it works? How are you running the FPGA VI when you're trying to start the project - does the RT VI call it and tell it to run? Bdog

Return to Home Page
Toggle navigation

Solutions

Industries

Academic and Research
Aerospace, Defense, and Government
Electronics
Energy
Industrial Machinery
Life Sciences
Semiconductor
Transportation

Product Life Cycles

Design and Prototype
Validation
Production

Focus Areas

5G and 6G Technology
ADAS and Autonomous Driving Testing
Electric Vehicle Test
Lifecycle Analytics
Radar and Electronic Warfare
Space Launch and Exploration
Validation Lab Innovations

See our approach to solutions

Get a Helping Hand

From troubleshooting technical issues and product recommendations, to quotes and orders, we’re here to help.

Products

Software

View All Software

LabVIEW
TestStand
FlexLogger
SystemLink
DIAdem
VeriStand
OptimalPlus GO

Software Suites

LabVIEW+ Suite
HIL and Real-Time Software Suite
Circuit Design Suite

SERVICES

View All Services

Repair Services
Calibration
Training Courses

HARDWARE

View All Hardware

Data Acquisition and Control

Learn About DAQ
CompactDAQ Bundles
Multifunction I/O
Voltage
Digital I/O
Temperature
Sound and Vibration
Current
Strain, Pressure, and Force
CompactDAQ Chassis

Electronic Test and Instrumentation
PXI Instrument Bundles
GPIB, Serial, and Ethernet
Switches
Oscilloscopes
Digital Multimeters
Source Measurement Units and LCR Meters

Wireless Design and Test

Software Defined Radios
RF Signal Generators
Vector Signal Transceivers

Application-Specific Systems

Semiconductor Test System
Power Electronics Test Systems

Accessories

Power Accessories
Connectors
Cables
Sensors

FEATURES

Entry-Level DAQ

RESOURCES

Advisors
Distributors

See all products

PC-Based Systems

Benchtop Measurement and Test

CompactRIO

Distributed Measurement and Control

PXI

High-Performance Test

Software

Systems Engineering Software

Perspectives

Perspectives showcases how NI sees what’s next in the world of test and technology.

View all articles

Charting the Course for Test Development with LabVIEW

LabVIEW remains key in test, promising speed, efficiency, and new features with NI’s investment in core tech, community, and integration.

Read our featured article

Support

Resources

View All Support Resources

Software Downloads
Register and Activate
Product Documentation
Release Notes
Online Training
KnowledgeBase
Code Examples

Request Support

You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.

Open a service request

Popular Software Downloads

See all Software Product Downloads

LabVIEW

Multisim

Academic Volume License

Popular Driver Downloads

See all Driver Software Downloads

NI-DAQmx
Provides support for NI data acquisition and signal conditioning devices. 
NI-VISA
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments. 
NI-488.2
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.

Community

About

My Account

Account

Cart

Solutions
- Back
- Industries
- Academic and Research
- Aerospace, Defense, and Government
- Electronics
- Energy
- Industrial Machinery
- Life Sciences
- Semiconductor
- Transportation
- Product Life Cycles
- Design and Prototype
- Validation
- Production
- Focus Areas
- 5G and 6G Technology
- ADAS and Autonomous Driving Testing
- Electric Vehicle Test
- Lifecycle Analytics
- Radar and Electronic Warfare
- Space Launch and Exploration
- Validation Lab Innovations
- See our approach to solutions
Products
- Back
- Software
- View All Software
- LabVIEW
- TestStand
- FlexLogger
- SystemLink
- DIAdem
- VeriStand
- OptimalPlus GO
- Software Suites
- LabVIEW+ Suite
- HIL and Real-Time Software Suite
- Circuit Design Suite
- SERVICES
- View All Services
- Repair Services
- Calibration
- Training Courses
- HARDWARE
- View All Hardware
- Data Acquisition and Control
- Learn About DAQ
- CompactDAQ Bundles
- Multifunction I/O
- Voltage
- Digital I/O
- Temperature
- Sound and Vibration
- Current
- Strain, Pressure, and Force
- CompactDAQ Chassis
- Electronic Test and Instrumentation
- PXI Instrument Bundles
- GPIB, Serial, and Ethernet
- Switches
- Oscilloscopes
- Digital Multimeters
- Source Measurement Units and LCR Meters
- Wireless Design and Test
- Software Defined Radios
- RF Signal Generators
- Vector Signal Transceivers
- Accessories
- Power Accessories
- Connectors
- Cables
- Sensors
- FEATURES
- Entry-Level DAQ
- RESOURCES
- Advisors
- Distributors
- See all products
Perspectives
Support
- Back
- Resources
- View All Support Resources
- Software Downloads
- Register and Activate
- Product Documentation
- Release Notes
- Online Training
- KnowledgeBase
- Code Examples
- Popular Software Downloads
- See all Software Product Downloads
- LabVIEW
- Multisim
- Academic Volume License
- Popular Driver Downloads
- See all Driver Software Downloads
- NI-DAQmx
- NI-VISA
- NI-488.2
- Request Support
- You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required. Open a service request
Community
About
Contact Us
Account