DAQmx　data acquisition

mittly · ‎07-26-2016

Hi, guys!

I am a freshman.

I have a trouble with DAQmx channel configuration. I have two channel to configure ,one need IEPE ,and another one not , but in the example ,I have to configure both of them to be IEPE stage or not .

And the help context tell me I have to use the DAQmx API to specify the desired configuration .The question is I don't know how to do it .

If you have any suggestion or example, I would be appreciate.

You can find the example with the guide of the following picture .

Thx !

lease Mark the solution as accepted if your problem is solved and help author by clicking on Star kudoes.

crossrulz · ‎07-26-2016

Duplicate thread: http://forums.ni.com/t5/LabVIEW/DAQmx-data-acquisition/m-p/3326805#U3326805

There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5

mittly · ‎07-27-2016

I C．

lease Mark the solution as accepted if your problem is solved and help author by clicking on Star kudoes.

LabVIEW