Hi,
I'm building a monitorring application for a client. The monitorring application can monitor up to 10 "Drawers" to be defined by the customer. I thought it would be convinient if the client could define the Drawers as "tasks" on NI-MAX. This way the can decide how to wire the drawers to the 3 available NI-9205's and also define the scaling themselves.
The speed is not very important but with the vi I've built I can only do ~1sec updates when running 10 "Drawers", I need about ~10Hz. I did find the reason for the slowness, the DAQmx state machine but failed to fix this. I have tried to start the tasks outside the loop but this gives me the 50130 error because the "Drawers" share the NI-9205 modules; it does work if each Drawers has its own module.
I hope anyone can give me some tips/hints how to change my application maintaining the customer to change the wiring/scaling of its "Drawers".
Thanks!