Communicate mit GoPro

[TUDarmstadtLLX]

Hello,

I have find a way to communicate with GoPro, so that I can take pictures and videos with LabVIEW application. But I am confused with the following information:

how can I send the magic packet? I have tried with TCP/IP, but how can I send the Subnet Mask?

Best Regard

[RTSLVU · Accepted solution]

You don't send a subnet mask.

The subnet mask is used by your local computer so it can only "hear and see" IP addresses that are not masked out.

(or something like that)

[udka]

Hi @TUDarmstadtLLX
You were able to get GoPro to work with LabVIEW?
-Could you share the steps followed?

[TUDarmstadtLLX]

Hi, I have found the http command list for GoPro. I have used these command to setup GoPro5, such as change the frame pro second, power off. But I have not found the command to take a picture or video. From the post of others, I got the information that before I send the command to the GoPro to take a picture, I need to send the Magic Packet. I will try it today. If I make it, I will share my code.

The http command list is here

Best regard

[TUDarmstadtLLX]

Hi,

I can use the http command to set the camera, but I still can not control the camera to shoot video or take picture.

Best regard

[TUDarmstadtLLX · Accepted solution]

Hi,

I guess I have found the solution. I have successfully controlled the GoPro Session 5 with Python API. This API can be found in GitHub.

LabVIEW have a VI, which can implement the python script. The detail can be found here. I want to test it, but my GoPro is suddenly broken.

Best regard

[TUDarmstadtLLX · Accepted solution]

I have used Python with LabVIEW to control the camera to take photos and shoot videos.

[GFPBOX]

Nice! Is it possible to save at least 10 shots per second with LV control ?

[TUDarmstadtLLX]

Hi,

under the "Burst Mode", you can take up to 30 photos pro second. But the LabVIEW program needs to be changed.

Best Regards.

[AMANJRahman]

Hello,

Is there possible to sync and trigger multiple GoPros say four GoPro 6s together using Labview?

If yes, please I need your help. I have several instruments and I am able to sync them all together except GoPros.

Best Regards,

AMANJ