Cannot debug remote application

[Vazgen_H]

If you have SSP, you can open a bag report request and someone from NI will escalate this.

[RT_Instron]

Apologies - I'm not familiar with how to open a bag report request. Could you link a guide for doing this?

[Vazgen_H]

Of course. Refer to this link and click on the "Report a bug" button.

https://www.ni.com/my-support/s/service-requests

[RT_Instron]

Great, thanks.

I've submitted a bug report. Request 01403837.

I will give an update here if anything changes.

[Vazgen_H]

Ok. Thank you.

[RT_Instron]

I got a reply back form technical support.

This is a known bug and the software engineers are aware of it. But no estimate as to how long it would take to patch.

[avogadro5]

Does anyone know why this isn't on the known issues page? I know it's probably not the most used feature but there doesn't seem to be a workaround and some issues are very hard to debug without it.

[RT_Instron]

It definitely should be on the known issues page.

I ended up reverting back to 2021 (non-SP1 version). It seems to be working on that version just fine and all my code was still compatible.

[SuperLee]

I have the exact same issue too.
I create an very simple test VI and build it with debugging enabled and connect to it I get only "Failed to connect to remote application".

I tried Labview 2021 SP1 first, Failed.
Then I upgrade to 2021 SP1 f1, failed too.
I uninstall Labview and install Labview 2021(without SP1), failed again.

All of 3 version failed.

[avogadro5]

This appears fixed in the f2 patch which is available on NIPM.