12-09-2015 12:42 PM - edited 12-09-2015 12:56 PM
Hi,
how can I call the DAQ Assistant Dialog
from Labview code, and also from a the compiled program with Labview runtime?
Now I can configure the DAQ Assistant Express vi inside the block diagram, but can not change it during runtime.
But the DAQ configuration is not static. The end user have to change it.
A similar dialog is used inside Measurement & Automation Explorer with a global DAQmx Task.
Can I call this dialog from Labview?
Peter
Solved! Go to Solution.
12-09-2015 01:01 PM
12-09-2015 01:15 PM
I know how to configure DAQmx tasks, channels ... by Labview code.
But I want avoid to redesign the same GUI of the DAQ Assistant.
12-09-2015 01:28 PM
12-09-2015 01:48 PM
I know how to use the low level functions from the DAQmx palette. But not how to call the DAQ Assistant dialog to change a Task.
12-09-2015 01:55 PM
12-09-2015 01:59 PM
You aren't reading the replies and what you're asking for doesn't really make sense. If you understand the DAQ assistant is for simple tasks and the DAQmx API is for something more flexible, it doesn't make sense to ask how to open the API programatically.
What is your actual goal here? It sounds like you want something similar in appearance for your users to have to work with the DAQmx API in the background. Creating a similar GUI is trivial. You've spent more time arguing about it on this thread. So, I have a hard time thinking that's your task either.
What is it you're hoping to accomplish?
12-09-2015 02:14 PM
Ok. The DAQ Assistant cannot used inside a program. Only to configure the Labview DAQ Assistant Express vi, inside MAX and SignalExpress. Creating a similar GUI is not trivial if you see all the different dialog types. But why reinvent the wheel?
12-09-2015 03:56 PM
12-11-2015 05:12 AM
There exists a solution to call the MAX DAQ Assistant from Labview code to create or change a DAQmx task: LabVIEW DAQmx Assistant VIs