903x

[Shivakumar_naganoor]

903x

[JÞB]

---

@Shivakumar_naganoor wrote:

903x

---

Use a boolean control and set the "Mechanical Action" property to Latch when released. 

[Jacobson]

---

@Shivakumar_naganoor wrote:

903x

---

Tools > Advanced > Clear Compiled Object Cache...

[JÞB]

---

@Jacobson wrote:

---

@Shivakumar_naganoor wrote:

903x

---

Tools > Advanced > Clear Compiled Object Cache...

---

I'm not sure what your reply is getting at for the OP.  I suspect that you felt like it might have been a joke continuation.   

A "903x" is a common SPST physical push button switch with LED of color x that "Clicks in, Clicks out."  It physically has a Latch when Pressed action off-on and Latch when Released on-off.  With the indirect use of a mouse, rather than direct physical contact by the user, Latch when Released is the proper way to emulate the physical behavior of this type of switch with a LabVIEW UI.  

My previous reply was simply Calibration of my Magic 8-Ball. 

EDIT I guess that should be  Switch When Released!  I'll write up the 8-Ball out of calibration report. 

Stop laughing crossrulz! I am having a bad day 😉

[mcduff]

---

@JÞB wrote:

---

@Jacobson wrote:

---

@Shivakumar_naganoor wrote:

903x

---

Tools > Advanced > Clear Compiled Object Cache...

---

I'm not sure what your reply is getting at for the OP.  I suspect that you felt like it might have been a joke continuation.   

A "903x" is a common SPST physical push button switch with LED of color x that "Clicks in, Clicks out."  It physically has a Latch when Pressed action off-on and Latch when Released on-off.  With the indirect use of a mouse, rather than direct physical contact by the user, Latch when Released is the proper way to emulate the physical behavior of this type of switch with a LabVIEW UI.  

My previous reply was simply Calibration of my Magic 8-Ball. 

EDIT I guess that should be  Switch When Released!  I'll write up the 8-Ball out of calibration report. 

---

My 8-Ball says its the 903x cRIO series. Anybody want to wager? 🙂 

[JÞB]

---

@mcduff wrote:

---

@JÞB wrote:

---

@Jacobson wrote:

---

@Shivakumar_naganoor wrote:

903x

---

Tools > Advanced > Clear Compiled Object Cache...

---

I'm not sure what your reply is getting at for the OP.  I suspect that you felt like it might have been a joke continuation.   

A "903x" is a common SPST physical push button switch with LED of color x that "Clicks in, Clicks out."  It physically has a Latch when Pressed action off-on and Latch when Released on-off.  With the indirect use of a mouse, rather than direct physical contact by the user, Latch when Released is the proper way to emulate the physical behavior of this type of switch with a LabVIEW UI.  

My previous reply was simply Calibration of my Magic 8-Ball. 

EDIT I guess that should be  Switch When Released!  I'll write up the 8-Ball out of calibration report. 

---

My 8-Ball says its the 903x cRIO series. Anybody want to wager? 🙂 

---

Sure,  but the wager must be low and the new, bluebar OP needs to introduce (select any or none pronouns) on a new thread on Breakpoint linked here for payoff.  I may have had a bad day.  And, you have no 8-Ball!