blank Target Build Settings

[ArneVoigt]

hello folks,

I have some knowleadge with the MPC555 processor in the MatLab RealTime Workshop -- but iam currently trying to get into the embedded Modules for LabView.

I will try to build a little vi (something like a+b=c)  within a "Blank Target - Template". Once thats done i need to configure the Build Specifications to incorporate with my Compiler, Linker and so on -- i hope that will bring me to some sort of flash or ram imagefile.

but the "Build Specifications"-Window doesn´t fully display all entry fields -- see the picture.

* do i need those fields?
* what are they used for?
* any workaround known?

I will happy for all hints on that

iam using Labview 8.5, a MPC555 will be my target (so the Codewarrior is the Compiler)

bye arne
 

[Michael.Phillips]

Hi Arne,

One option is to open the dialog plug-in VI and scrolldown on the front panel a little, then save the VI. This will change what you see in the build specifications window.

Another option: Create another build specification Category page using the Target Editor. If you plan to add several configuration options, this step would probably be best. 


Message Edited by Michael P on 02-12-2008 10:23 AM