From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
03-18-2015 12:08 AM
i wnat to display 51 bytes data.how to display string data in the array format
03-18-2015 03:17 AM
Hi gopi_ni,
Do you want to display each byte as single row in an array? Could you be a little more specific how you would like to display the data.
BR,
Marcus
03-18-2015 03:47 AM
Hi,
Didn't understand the ques properly though.
See if you want as shown above.
Regards,
Bijay
03-18-2015 05:11 AM
thanks,, i want to read the data from the port in array format.
03-18-2015 05:13 AM
hi, im a beginner in labview.i want to read the data from the port in the form of array.
03-18-2015 05:59 AM
Be a lot more specific. An array of what? Examples showing an input and the desired output would help us help you.
03-18-2015 12:17 PM
Try this.
03-18-2015 05:05 PM
Please ask programming support questions in the LabVIEW forum, not in the community groups.
When you ask a question in the forum, those who have time to answer will look at your question and reply.
When you ask a question in an NI community group EVERY MEMBER GETS SPAMMED with your question.
I'm sure most people don't realise this when they post thier questions here in an NI community.
03-18-2015 11:27 PM
thank you
03-18-2015 11:29 PM
thank u