microcontroller USB labview

[scream]

Hi everyone I want to display the data from microcontroller on Pc by using labview I use USB port to transmit these data for labview. I dont know how I display 4 data in one interface I installed VISA USB.  There are anyone to help me to do this interface and thank you in advanced.

ther are 2 file :

- the microcontroller program

- how USB send data every 100ms, each data is advanced by hexadecimal code (1,   ,2,    ,3,     ,4,     ,)

[Edna-S]

What type of USB cable are you using? You can always look at the examples by going to help at the LabVIEW splash window>>find examples>>hardware input and output. There are alot of examples here that you can start with such as VISA folder. By VISA USB, do you mean NI-VISA? becuase you do need this driver. 

You can also look at our community examples here http://zone.ni.com/dzhp/app/main by searching in browse. Also take a look at this example: https://decibel.ni.com/content/docs/DOC-19723

[CarlosOtiniano]

I recommend you also check the following link 

http://www.eevblog.com/forum/projects/labview-interface-for-pic18f4550-using-winusb/?action=dlattach...

[CarlosOtiniano]

You can labview communicate with the microcontroller through the USB port

http://www.microchip.com/forums/m659974.aspx