No serial COM port available on sbRIO

[ar-numa]

Dear All,

I use the "Visa Configure Serial Port.vi" from "Instrument I/O->Serial" pallet in my application, to get access to the serial com port on my sbRio-9636.

When running the application the error out from the "Visa Configure Serial Port.vi" states the code -1073807202.

Result by LabView help: "-1073807202: VISA or a code library required by VISA could not be located or loaded. This is usually due to a required driver not being installed on the system."

So I did check out the installed drivers by M&A Explorer and found no NI-VISA drivers installed. I installed the NI-VISA 5.1 from drivers list (Fig1), but still get the same error. Are there further drivers which have to be installed corresponding to COM-Port access by VISA? Currently I only have drivers installed at shown in Fig2.

Thanks in Advance for your help.

Regards,

ar-numa 

[Spex · Accepted solution]

Hi ar-numa,

Please add NI-Serial RT.  That should resolve your issue.

Cheers,

[ar-numa]

Hi Spex,

thanks a lot, your solution solves the problem.