ETHERNET PROBLEM

[nizam2]

Hello and Good day

I want to connect my pc (windows 😎 to the oscilloscope TDS3012C and read all the reading at the labview

I already tried by using

1.NI MAX. and i cannot detect any connection from the scope (as attached)

2. By changing Ip address from the scope. when i first time operate this scope. it doesnt give any ip address. so i assigned any ip number as attached

I followed  step by step from this link - http://www.tek.com/support/faqs/how-do-i-connect-my-oscilloscope-ethernet-connection-ni-visa but in wins 8 there's is IPV4 and IPV6. i already change the ip adresses at IPV4. and open web address http://'ip address'/ but nothing came out.

[nyc_(is_out_of_here)]

You were already told what you needed to learn with your other thread. No need to rehash the same topic.

http://forums.ni.com/t5/LabVIEW/GPIB-PROBLEM/td-p/3003491/page/2

[nizam2]

Sorry nyc

I though it was different title which is in different room. I will delete this post as soon as possible. 

thanks