Read range channel module

[Spring]

Hi

  I want reading the range module channeles in FP-1000(serial) Programmatically

[RavensFan]

Duplicate post.

See here:  http://forums.ni.com/ni/board/message?board.id=110&message.id=5643

Please return to your original post for questions where someone had already responded to you.

[Spring]

I want read and write range channel from fp-1000 and the module is TC module,AI 110 and AI-100 Programmatically 

[Brian_K.]

Hi Spring,

Normally it is better to keep posts all on the same thread, it helps with clarity.  I believe to answer your question, you can change the FieldPoint Ranges by following this knowledge base.

http://digital.ni.com/public.nsf/websearch/E118853FBA8DFE82862572060058EA2E?OpenDocument

The Configure Range.vi seems to be exactly what you want.