After installing NI software for the FRC robot driver station the Windows 10 H-P laptop PC started to get BSOD soon after booting (a minute or so later). Frequency of failure is increasing and sometimes the PC won't complete booting and won't boot for several trys. Turns out there are much fewer problems if the USB HID devices aren't attached at boot up - no mice, keyboards, joysticks, etc. works best as does not starting any programs for awhile after booting. Then plugin devices later. Sometimes the BSOD still happens latter. BSOD error is CRITICAL_PROCESS_DIED.
Ran Verifier that comes with Windows 10 and it says at bootup that NIPCIBBRD.SYS has failed. That driver may or may not be the cause of the BSOD but Verifier stops booting at the first error it finds which is that one.
Can't find any information or update for that driver nor any method to disable it to see if the BSOD goes away.