I2S Communication Generate / Acquire Signals

[LDob]

Overview
This example program that shows how to communicate with High Speed Digital I/O using the I²S serial bus protocol.
Description
Inter-IC Sound Interface (I²S) is a serial bus protocol developed by Philips Semiconductors. You can use NI software and hardware to generate and acquire I²S signals. 
Requirements

• LabVIEW 2012 (or compatible)

Steps to Implement or Execute Code

1. Unzip “LabVIEW I2S Code 2012 NIVerified”
2. Open “I2S Encode Decode 2012 NIVerified.lvproj”
3. Run " I2S_Encode_Decode.vi" for demonstration
4. Run the program

Additional Information or References
VI Block Diagram

 **This document has been updated to meet the current required format for the NI Code Exchange.**

[feesho]

Excellent!