IVI based VB-Examples

[michaelkr]

configuring IVI-devices in vb-examples p.e. "codefreedmm", i get error BFFA002E while the CVI examples with the same IVI-devices work correctly.

Also the "INSTR" Examples p.e. "Measure DC Volts" don't work with VB, while they work with CVI.

My customer wants to use VB.

What do i have to reinstall?

[AlexxxR]

Hi,

do you use Measurement Studio?

As far as I know the Examples and if I read trough the readmeDMM.html you can find under Start--Programms--National Instruments--NI-DMM I think you have to use Measurement Studio to run this examples.

But you can try the examples that ships with the newest NI-DMM, if you really want something to reinstall.

https://www.ni.com/en/support/downloads/drivers/download.ni-dmm.html

Here you can also read the readmeDMM.

Hope this helps a bit.

Alex

[michaelkr]

Hi Alex, thanks for your response, but I have to be more precise:

I do have the total developper suite installed on my computer, but:

The LABVIEW examples work perfekt with the IVI- drivers,  the CVI- examples do it as well,

but: the VB examples do not!

Checking the configuration always shows the error message mentioned above. (BFFA002E )

So meanwhile I have a slight guess, that VB is not as much supported as LABVIEW resp. CVI.

Do you have any idea?