Does NI DAQmx driver support PCI 6527 Card

[A_Senthilnathan]

In my application i am using PCI 6527 Isolated DIO Card. In the examples from LabVIEW 7.0, i refered the following VIs
1. Write Dig Chan.vi
2. Write Dig Port.vi
using DAQ 7 Driver.

There it gives a list of devices that can run these examples. The list does not contains PCI 6527.

Can I use DAQmx Example VIs with PCI 6527 Card?

Please suggest me what driver to use with 6527 Card (Traditional DAQ or DAQmx).

[JustinBritten]

Our DIO boards, including the NI 6527, are not yet supported by the NI-DAQmx 7.0 driver. This information is in the Knowledge Base article linked below, as well as in the NI-DAQ 7.0 Readme file.

Overview of Hardware and Software Support in NI-DAQmx
http://digital.ni.com/public.nsf/websearch/8DFD2C9085ACB5FC86256D2600817F77?OpenDocument

If you would like to use the NI 6527 in NI-DAQ 7.0 you will have to use the Traditional driver.

Best Regards,
Justin Britten

Applications Engineer
National Instruments

[A_Senthilnathan]

Thanks Justin Britten.

[jr.josias2]

Hello partners,

I'm using NI DAQmx 9.7 in a machine hosting a Windows 7, but always when I tried to run the application I got this error.:

CAN'T LOCATE THE DRIVER ERROR 10240

Does you have any idea why could I'm facing this problem ? Previously I was using the original driver NI DAQ 7.4.4 (Legacy) in a machine hosting a Windows XP.

Other point perhaps here isn't the best place to start this new post, but I couldn't find how to post a new topic on the site.. My apologies, i'm waiting for any solution or advice

Best Regards

Josias Junior