Suddenly "Memory Resource Conflict" was happened, How can I solve it?

[kubota]

I used PCMCIA-CAN card as usual, but suddenly the card stop.

And I tried self-test on PCMCIA0CAN Measurement & Automation Explorer, but the self-test failed and memory resource conflict was reported.

Then I checked conflict on device manager of Windows XP, but no conflict for memory and also interrupt.

There is a website which explain how to solve this kinds of error, and I tried the solution explained here. But I have still the problem.

[link removed]

Also, PCMCIA0CAN Measurement & Automation Explorer shows hardware series of the card is 1, but I am using PCMCIA-CAN series2.

Could you please let me know how to solve the problem?

Early answer will be highly appreciated.

Thank you for your help in advance.

----------------------------------------------------

いつもどおりPCMCIA-CAN のカードをつかっていたら、急にカードが動かなくなりました。

PCMCIA0CAN Measurement & Automation ExplorerでSelfTestをしたのですが、失敗しmemory resource conflictと表示されました。

そこで、WindowsXPのデバイスマネージャでConflictをチェックしたのですが、メモリーも割り込みも問題ありませんでした。

上記のWebにこの種の問題の解決方法が載っていたので、試してみたのですがだめです。

私が使っているカードはPCMCIA-CANのシリーズ2なのですが、PCMCIA0CAN Measurement & Automation ExplorerのHardwareSeriesは１になっています。

どうやって問題を解決したらよいのかを教えてください。

早めの対応をお願いします。

[DirkW]

Hi,

Truy the following :

1. remove the board from your PCMCIA carrier. ands close all NI software. (MAX, LabVIEW, CVI...)

2. uninstall the NI-CAN driver and reboot your machine.

3. Install the newest NI-CAN driver 2.4 from here  and reboot again.

4. insert your board again and check in MAX for the board.

Please post your results to this thread.

DirkW

[kubota]

Dear DirkW,

Thank you for your advice.

The problem was resolved and now everything is working.

By the way, Is this a problem of occurring frequently?
It is troublesome if the problem often occurs. For example, weekly or monthly.

Regards,

Miyako

[DirkW]

Hi,

Hopefully this was an problem of the underlaying service software for the PCMCIA hardware. We changed to a new version for this software with NI CAN 2.4 and you should not face this problem anymore.

DirkW

[kubota]

Hi,

Thank you for you reply. I feel relieved.

Regards,

Miyako