New Technology Mag Needs LabVIEW Programmers for Interview

[Deirdre]

Jim Mahony, an editor at New Technology Magazine, is looking an end-user using LabVIEW in a drilling or fracturing applications. 

About New Technology Mag
New Technology Magazine is a source for stories about new and cost-saving technologies in the upstream oil and gas industry. The magazine, published ten times a year, delivers articles on drilling and completions, information technology, software, production, heavy oil and oilsands, seismic and geophysical technologies, and the environment. The magazine is distributed to all segments of the Canadian energy industry, but the primary readers are engineers, geologists, geophysicists, IT professionals, and executives in upper and middle management. Canadian readers include Daily Oil Bulletin subscribers as well as members of the Canadian chapter of the Society of Petroleum Engineers. Circulation for each issue reaches a minimum of 7,000 readers.

Let me know if you are interested in participating and showcasing your application.
Deirdre

[andre.buurman@carya]

How about a pilot plant generator we build for Shell Global Solutions?

Some presentations: 1 and 2.

Erik van Gelder (Carya) can be contacted if interested.


Message Edited by andre.buurman@carya on 06-10-2008 10:29 PM

[Deirdre]

Andre,

Thanks so much! I will forward this information on to the editor.  Looks awesome.

Deirdre

[Mike_King]

Deirdre, we would definitely be interested in showcasing our applications in New Technology Magazine.  We work almost exclusively in building solutions for fracturing and pressure pumping equipment and with service rigs.  All our control systems are built in LabVIEW and are pushing the edge for automated setup / configurability of frac equipment from a software perspective.

I am the product development manager and would be happy to discuss and provide more information. My contact # is (403)571-7273 x237. A couple of datasheets of our products are available here for more information:

Overview:  http://www.advmeas.com/pdfs/Prophet%20FRAC%20Overview.pdf
Prophet Datavan: http://www.advmeas.com/pdfs/Prophet%20DV%20v3.4.pdf
Prophet Pumper: http://www.advmeas.com/pdfs/Prophet%20Pumper.pdf
Prophet Blender: http://www.advmeas.com/pdfs/Prophet%20Blender.pdf

Thanks,
Mike

[Deirdre]

Awesome, Mike.  I sent this information on to the PR team, who will coordinate with the editor. 

Deirdre