USRP Software Radio

cancel
Showing results for 
Search instead for 
Did you mean: 

How to know if the USRP x310 is connected to USB 2.0 or 3.0?

Hello NI community,

 

I hope I didn't mistake the subforum.

I have an USRP x310 connected through a USB 3.0 port.

To verify this, I saw that I can do

uhd_usrp_probe

But this command does not log anything about USB connection. Instead, I have this:

$ uhd_usrp_probe 
[INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800; UHD_3.14.1.0-release
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Maximum frame size: 1472 bytes.
[INFO] [X300] Radio 1x clock: 200 MHz
[INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D00000000000)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1306 MB/s)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1306 MB/s)
[INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000)
[INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000)
  _____________________________________________________
 /
|       Device: X-Series Device
|     _____________________________________________________
|    /
|   |       Mboard: X310
|   |   revision: 11
|   |   revision_compat: 7
[...]

Any thought?

 

Thank you very much.

Best regards,

rb

0 Kudos
Message 1 of 1
(2,054 Views)