04-04-2017 12:23 PM
GNU Radio is having trouble detecting my USRP. MATLAB is able to detect the USRP device, while GNU Radio throws an error whenever it tries to detect a device at 192.168.10.3.
My setup is: Laptop -> Wired Ethernet -> Switch -> NI USRP-2920.
OS: Windows 10
My computer is configured with the static IP address 192.168.10.1.
I recently downloaded the automated NI-USRP driver software that updates the USRP image to the latest
firmware. This had no effect on the error message.
How do I get GNU radio to detect my USRP device? Please take a look at the attached pictures. Let me know if you need any more information!
If y'all could help, I'd be very grateful.
Thanks!
04-07-2017 11:33 AM
Hi bup,
For any help with programming USRPs using GNU radio or the Ettus UHD, you're going to have better results going through Ettus support channels: https://www.ettus.com/support. You certainly may get some answers here, but the Ettus side will likely get you in touch with more people working with GNU radio specifically.
Cason
NI Applications Engr.