NI-DAQmx仿真设备是不是不能用于traditional NI-DAQ 选板上的子VI呀？

[hjhnh999]

我创建了一个DAQmx的仿真设备6259，然后想在traditional NI-DAQ 选板的VI中调用，但是出现错误代码10401，

显示“可能原因 NI-DAQ LV:  The specified device is not a National Instruments product, the driver does not support the device (for example, the driver was released before the device was supported), or the device has not been configured using the Measurement & Automation Explorer.”

但我用DAQmx的VI就可以使用，不知何故？我的DAQmx装的是9.0.2版的。

望指教！谢谢！

[jwdz]

应该是不支持的！

还是用DAQmx吧，传统DAQ的性能不如DAQmx好！

[hjhnh999]

我就是学习一下，刚学习labview不久。谢谢了！