Multisim and Ultiboard

Showing results for 
Search instead for 
Did you mean: 

How to find the 4x4 impedance matrix

Go to solution

I am using the network analyzer to find impedance. I wonder if Multisim has a network analyzer with 2 input ports that can measure the 2x2 impedance matrix of a 2-port network. Also can Multisim do a 4-port network analyzer and measure the 4x4 impedance matrix? Or are there any other methods to measure the 4x4 impedance matrix?



0 Kudos
Message 1 of 2
Accepted by topic author zq001
06-24-2019 12:39 PM

Hi zq,


I would like to understand what hardware are you using? In my experience, I would recommend using LabVIEW to make the measurement with the real DMM and share that information with multisim, but I consider it will be done better to do using LabVIEW and the real hardware. Below I share further infromation.


Multisim is not as hardware interface API, hence we normally do not recommend to use hardware with mutisim.


Introduction to Digital and Analog Co-simulation Between NI LabVIEW and NI Multisim

Automate Circuits Analyses with the NI LabVIEW Multisim API Toolkit


0 Kudos
Message 2 of 2