question about setup_MITE in the PCI-MIO-16E-1

[PCI E Series Register-Level Programmer M]

I have a quick question about setup_MITE in the PCI-MIO-16E-1. In one of the manuals, it states that if you're using Dell Optiplex GX series for our hardware configuration, is it true we need to re-write the MITE functions to correlate with the hardware? Please if you can clarify what this means, I would really appreciate it. Thank you in advance.

[Filipe A.]

Hello;

Unfortunately, National Instruments doesn't have support for Register Level Programming beyond the documents posted at www.ni.com.

However, those manuals were revised and contain the information that can be followed to program the DAQ device.

Regards
Filipe A.
Applications Engineer
National Instruments

[Christian_L]

National Instruments is starting a new newsgroup to provide a forum for customers to discuss register level programming issues and ask questions. This newsgroup is not a direct support channel for register level programming, but may be monitored by National Instruments engineers. Please post you question with additional detail in:

natinst.public.daq.driver-development.general

Christian