Sensor powering from FieldDAQ

[ma.sav]

Hello,

I am looking a the FieldDAQ product line and it seems very interresting to get digitalisation as close a possible to the sensors.

I would like to use this product with sensor requiring power supply voltage between 15 and 30 VDC with approximatly 1.5W.

Unfortunatly the FD-11601 cannot provide enough power (only 600mW).

My question are:

• Any chance that NC pin of FD-11603 voltage input connectors are internaly connected to V, C or Aux of power connector?
• Any chance that NC pin of FD-11603 voltage input connectors are internaly connected together? (Then I would dedicate one input to provide power to other...)
• Is there another FD reference that would do that in the future? (for example 5W max per channel, 25W total max would be nice)

Thanks in advance for any information.

Ref:

https://www.ni.com/documentation/en/voltage-input-device-for-fielddaq/latest/fd-11603/pinout/

https://www.ni.com/documentation/en/voltage-input-device-for-fielddaq/latest/specs-fd-11603/specs/ 

https://www.ni.com/documentation/en/voltage-input-device-for-fielddaq/latest/fd-11601/pinout/

https://www.ni.com/documentation/en/voltage-input-device-for-fielddaq/latest/specs-fd-11601/specs/