Hello, I have a question concerning the CompactDAQ Controllers. Is it possible to access it remotly via internet connection? Also is it start program run after the power is ON or should the user switch in manually? Is it possible to setup to do it automatically? If it is the wrong board, please recommend where I can ask this from? Thank you!

Sorry about the late reply. I just thought I'd do some testing on a cDAQ-9139 here in the office (since we do not have a 9132 here). I found that if I disconnected the power from the chassis while it was running (windows in my case), and then reconnected the power, the chassis automatically restarted again. So, it would seem (from this one test) that you wouldn't have to travel the 100km to only press the power button. If you enable a VI or LabVIEW application file to open during start-up of the OS installed on the standalone cDAQ, it should be able to begin data acquisition automatically. However, I feel I should note that repeated sudden power drops can damage the power supply in the chassis. Thus, I would recommend using an Uninterrupted Power Supply (UPS) that changes to a battery power if the source suddenly drops. Not only would it protect your device better, but it also means that any operation that is already running on the cDAQ would not be interrupted.

ni.com is currently undergoing scheduled maintenance.

Some services may be unavailable at this time. Please contact us for help or try again later.

Multifunction DAQ

CompactDAQ Controllers

Solved!

You're welcome. Best of wishes with your projects!

Message 11 of 11

(1,809 Views)

Multifunction DAQ

CompactDAQ Controllers

Re: CompactDAQ Controllers