From Friday, January 17th 11 PM CDT (January 18th 5 AM UTC) through Saturday, January 18th 11:30 AM CDT (January 18th 5:30 PM UTC), ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Can I use Calibration Hardware Adapter for E, M & S Series Devices Without the Executive

Is it possible to use the Calibration Hardware Adapter for E, M & S Series Devices (778056-03) without the Calibration Executive Software(777608-35)? I would like to use it and follow the "Calibration Procedure B/E/M/S/X Series For NI-DAQmx." Is the Calibration Adapter controlled by the DIO lines of the DAQ card being tested?

0 Kudos
Message 1 of 2
(3,445 Views)

The Calibration Procedure B/E/M/S/X Series For NI-DAQmx mentions the hardware adapter a few times which would tell me that you can use this device if you are using the calibration procedures laid out in this manual.  So to anwser you question no you don't need the Calibration Executive to utilize this piece of hardware.


David A

 


0 Kudos
Message 2 of 2
(3,433 Views)