10-14-2013 04:38 PM
Hi,
I am having trouble using the Dynamixel MX 64 & 106 with labview. I have found some examples but they don't have any examples on how to move all the servos at the same time ( joint mode). I have daisy chained three MX 64 and MX 106 ( 4 servos ). Does anyone have any suggestions or examples for me. I cannot seem to alter the VI successfully to accomplish what I'm after.
Thanks for any help,
Sahana
10-14-2013 08:52 PM
You may post this in Dynamixel forum, http://www.robotis.com/xe/qna_en, as well.
10-15-2013 09:03 AM
Hello Sahana,
If you have not seen this white paper already on the Dynamixel servos, it gives a great overview of one application with their use.
[1] Robotis Dynamixel Actuators in LabVIEW
Beyond this, you may have more feedback if posting in the Dynamixel forum on Robotis.
10-15-2013 11:42 AM
Thanks Kate !
10-15-2013 11:47 AM
Hi Hunt,
Thanks for your reply! I saw that page after I posted my question in here. I will try to modify that according to my requirements.
Thanks,
Sahana